The\u00a0technology for cable pulling has remained stable for decades, according to manufacturers. Randy Minor, senior product manager at the Wiring Device-Kellems Division, says. \u201cGrips are simple products that don\u2019t lend themselves to major changes.\u201d Terry Buono, co-owner of cabling installer Cable Systems Inc. (North Haven. CT), agrees. He has purchased his\u00a0cable-pulling equipment from the same vendor for years.\u00a0\u201cIf the method works, why switch?\u201d he asks.<\/p>\n\n\n\n
With all the changes occurring in the telecommunications and data communications markets, it is reassuring that contractors can find stability somewhere. However, some improvements in cable-pulling products are inevitable. For example, changes in product lines include the introduction of smaller pulling grips used to pull optical-fiber cables, and grips that are made of noncorrosive materials for use in harsh environments.<\/p>\n\n\n\n
Cable-pulling assemblies are designed to make the task of running cable easier and simpler. They support copper, aluminum, and fiber, solid or bare\u2013in large or small cables that can be used either inside or outside the plant, depending on the application.<\/p>\n\n\n\n
Pulling Grips \/ Wire Mesh Grips<\/em><\/strong><\/u><\/em><\/strong><\/p>\n\n\n\n Pulling grips help contractors pull, install or remove cables in conduit, ducts, or sheaves and aid immensely in overhead and underground cable\/conductor laying operations. Installers use the devices to eliminate the chance of snagging. Pulling grips also reduce the arc of a bend, the potential for kinking, and the strain on conductors inside the cable.<\/p>\n\n\n\n