Open Ended Cable Grips

Open Ended Cable Grips are used whenever an offset positioning is needed with the cable completely passing through the cable grip. Specifically, they include any power cables such as LV, MV, HV or EHV. Open Ended cable grips are most suitable for connecting two cables or ropes with each other for pulling and supporting purpose. The adjoining cables will collectively form a continuous loop. Typical application areas for open ended cable grips include replacement of elevator cables wherein the old cable are attached to the new cable to easily fed round the old one. They are also effectively used for any cable laying operations by trench contractors, and for mining operations.

Open ended joining grips are suitable to connect two cables or ropes for pulling or supporting purposes with each other, in the simplest possible way. These grips are used for the replacement of crane ropes or elevator cables.

Full specifications are given in the table below.

Part No. Cable Diameter(mm) Permissible workload with a 3 Times higher security load(kn) Total Length Approx
HE 10 06 – 10 2.2 1000
HE 15 10 – 15 3.4 1500
HE 20 15 – 20 6.8 1500
HE 25 20 – 25 6.8 2000
HE 30 25 – 30 8.1 2000
HE 40 30 – 40 11.7 2000
HE 50 40 – 50 16.0 2000
HE 60 50 – 60 16.0 2500
HE 70 60 – 70 21.3 2500
HE 90 70 – 90 27.9 2500
HE 110 90 – 110 34.9 2500