Hoisting Grips

Single Eye Support Grips help in distributing the force and taking the strain off during hoisting and suspension of the cable either vertically or horizontally. These support grips have a wire mesh for holding the size of cable. A closed version is used in the case where the installation of the top connector proceeds after hoisting the cable. On the contrary, an open version is used wherever installation of the top connector is done before hoisting the cable.

Customized cable meshes can be devised with factory-installed connectors and pre-installed hoisting grips on specific customer request. Specifically designed single eye construction takes the strain of cables off when suspended either horizontally or vertically.

Cable support grips provide protection to underlying cables and wires from damage by evenly distributing their weight throughout the length of the grip. Due to their construction, these grips can be used suitably for individual cables as well as bundles of cables.

Full specifications are given in the table below.

Part No. Cable Diameter(mm) Permissible workload with a 3 Times higher security load (kn) Total Length Approx
HH16 12 – 16 247 257
HH19 16 – 19 247 404
HH25 19 – 25 331 472
HH31 25 – 31 344 771
HH38 31 – 38 382 771
HH44 38 – 44 420 771
HH50 44 – 50 509 1.040
HH63 50 – 63 535 1.540
HH76 63 – 76 611 1.540
HH89 76 – 89 662 2.260
HH 102 89 – 102 738 2.260